CO2PO® Double Body Regulator

  • CO2PO® Double Body Regulator
CO2PO® Double Body Regulator CO2PO® Double Body Regulator CO2PO® Double Body Regulator

CO2PO® Double Body Regulator

SKU K302

PRICE AS CONFIGURED:

$129.99

Product Details

Our newest CO2PO® Regulator is built to serve. Fluent in all Beer Styles (and sub-styles), CO2PO® is here to recommend precise carbonation for your home brew. Built from solid brass, the regulator body features a stainless steel diaphragm — instead of rubber — for improved stability. A large ergonomic adjustment knob makes fine-tuning your carbonation more than just standard protocol. Easy-to-read regulator gauge includes PSI ranges for major beer styles, and with a maximum range of 40 PSI, CO2PO® allows for a higher resolution for dialing in exacting CO2 volumes. Its high-pressure gauge tells you when to refill your tank, and an integrated check valve ensures your safety. CO2PO® is here to serve your beer with nary a worry nor complaint.

The double body regulator has all the features of the CO2PO® Regulator but with a second regulator body. Two regulators allow for serving two different beer styles at their ideal carbonation level. Or force carbonating one keg at a high pressure while pouring another beer at serving pressure. Pairs well with the Last Straw™ Bottle Filler.

Features:
  • Machined brass body with stainless steel diaphragm
  • Rubberized gauges are easy-to-read.
  • Integrated beer style volume ranges on the dial face.
  • 40 Maximum PSI for improved resolution.
  • High-pressure gauge monitors tank pressure
Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Additional Information

SKU K302

Customer Reviews

Based on 12 reviews
33%
(4)
17%
(2)
17%
(2)
0%
(0)
33%
(4)
P
Phil B.
Double body regulator

I've had this for about a year. I'ts been working just fine, but now one of the regulators isn't behaving. I'll set it, adjusting it a couple times (I always shut the tank off when not actively carbing), I come back, turn on the tank when the pressure has gone down and the gauge almost maxes out. So, I'll carefully reset it and it's fine for a few days. Then I come back, (the high pressure side normally stays up), the whole system has lost its charge. crack the tank open, the low side either stays on zero or maxes out again. I can't trust it to leave the tank (20#er!) turned on. I'm only using one side at this time, going to switch sides to see if the other regulator does better.
And yes I've leak tested my system several times even tho the tank and hoses are tucked in the corner so as not to get bumped.
I really like the unit for the easy to read gauges compared with the commercial single gauge I've got. I hate the idea of tossing it in the trash, they ARE NOT cheap..

R
Rich Y.
CO2PO® Double Body Regulator

I'm glad I bought it. Set up a Keezer using Northern Brewer instructions. One pressure is used for the beer. The second is being used to carbonate Sprecher root beer, then the soda uses a different pressure than the beer. One CO2 cylinder. I do like the design and quality

W
Wade B.
Good design, good value

I upgraded my system from a single regulator to this dual model and I was immediately impressed with the feel of the dials (so much easier to operate than the former model) and the face of the gauge is easy to read.

S
Steve S.

CO2PO® Double Body Regulator

M
Michael C.
co2 regulator

I like the regulator but I thought the gas connection was barbed and not threaded so I had to buy new barbed connections so I could use it.

123

Customer Reviews

Based on 12 reviews
33%
(4)
17%
(2)
17%
(2)
0%
(0)
33%
(4)
P
Phil B.
Double body regulator

I've had this for about a year. I'ts been working just fine, but now one of the regulators isn't behaving. I'll set it, adjusting it a couple times (I always shut the tank off when not actively carbing), I come back, turn on the tank when the pressure has gone down and the gauge almost maxes out. So, I'll carefully reset it and it's fine for a few days. Then I come back, (the high pressure side normally stays up), the whole system has lost its charge. crack the tank open, the low side either stays on zero or maxes out again. I can't trust it to leave the tank (20#er!) turned on. I'm only using one side at this time, going to switch sides to see if the other regulator does better.
And yes I've leak tested my system several times even tho the tank and hoses are tucked in the corner so as not to get bumped.
I really like the unit for the easy to read gauges compared with the commercial single gauge I've got. I hate the idea of tossing it in the trash, they ARE NOT cheap..

R
Rich Y.
CO2PO® Double Body Regulator

I'm glad I bought it. Set up a Keezer using Northern Brewer instructions. One pressure is used for the beer. The second is being used to carbonate Sprecher root beer, then the soda uses a different pressure than the beer. One CO2 cylinder. I do like the design and quality

W
Wade B.
Good design, good value

I upgraded my system from a single regulator to this dual model and I was immediately impressed with the feel of the dials (so much easier to operate than the former model) and the face of the gauge is easy to read.

S
Steve S.

CO2PO® Double Body Regulator

M
Michael C.
co2 regulator

I like the regulator but I thought the gas connection was barbed and not threaded so I had to buy new barbed connections so I could use it.

123