Beer hops are typically added to wort in 3 stages during the boil: bittering, flavor, and aroma. These stages have to do with what role they are playing in your beer, and are not associated with a specific type of hop. In other words, the same hop variety might be used for bittering, flavor, and aroma. Not all beers will have 3 additions; some may have only one, some may have up to 5 or 6 additions. All beers do have at least one hop addition for bitterness, to balance the sweetness of the malt.
Any type of hop can be used for any addition
Meaning Cascade can be used as bittering, flavoring, or aroma hops. It is not uncommon that your bittering and aroma hops are the same. When you have a kit that comes with 2 oz. of Cascade hops and wonder which one is for bitter, and which one is for aroma, they are the same. 1 oz. gets added at the beginning of the boil, while the other ounce gets added right at the end of the boil.
Adding hops at different times you gives your beer more complexity
If you just added bittering hops, the beer would be fine, but it would be missing something. By adding the aroma hops, you are adding another dimension to your beer. If you used only aroma hops, your beer would be lacking bitterness. Not enough alpha acids from the hops would be isomerized in your boil.
The Hop Schedule
Most recipes will tell you when to add your hops either in time from the start of the boil, or time that is left in the boil. For example, you might have a beer that is supposed to boil for a total of 60 minutes. The directions might tell you to add the bittering hops 30 minutes into or 30 minutes left of the boil. Make sure you pay attention to how the recipe is written because it can make a large difference on how bitter the beer turns out. Click here for more information on the different types of hops.
When to add Bittering hops
Bittering hops are added once the wort has been collected in the kettle (or after you’ve added the malt extract) and a rolling boil has been achieved. They are usually boiled for 60 minutes, although some recipes call for as little as 30 minutes. All beers have some bittering hops. The main reason for this is that without the bitterness from the hops, your beer would taste syrupy-sweet. Another benefit is that hops are a natural preservative and will help your beer to keep for a longer time or for extended aging periods.
When to Add Flavoring hops
Flavoring hops are generally added with between 15 and 30 minutes remaining in the boil. In this time frame, very little of the bitterness will be extracted from the hops, but that crisp hoppy flavor will be imparted. Again, these may be the same as your bittering or aroma hops, it is the time that they are boiled that makes the difference.
When to Add Aroma Hops
Hop oils that are responsible for aroma are extremely volatile and will be driven off in the steam of your boil almost immediately. Therefore, aroma hops must not be boiled for long. They are typically added during the last 5 minutes of the boil, or at flame out (when the kettle is removed from the heat). Adding hops at flame out will produce the maximum amount of aroma.
Click here for information on dry hopping.
More information on Dry Hopping:
To begin or continue your homebrewing education, check out Northern Brewer University for our Homebrew Video Courses.